Wireless configuration for Macintosh
®
using the Brother automatic installer application
66
5
f Choose Manual and then click Next.
g For configuration, it is recommended that you temporarily connect your Brother wireless device (your
printer) directly to a free port on your access point, hub or router using a network cable.
If you can temporarily connect with a network cable:
Choose I’m able to temporarily connect my device to my access point with a network cable and
then click Next. Go to h.
If you do not have a network cable or cannot temporarily connect the Brother wireless device to your
access point:
Choose I’m not able to connect my device to my access point with a network cable and then
click Next. Go to i.
To Next Page
Loading...
