Wireless configuration for Macintosh
®
using the Brother automatic installer application
68
5
j Read the Important Notice. Check the box if you confirm, and then click Next.
k You need to temporarily change your computer’s wireless settings. Follow the on-screen instructions.
Make sure you take notes on all the settings such as SSID or channel of your computer. You will need
them to return your computer back to its original wireless settings, and then click Next.
Item Record the current wireless computer settings
Communication mode:
(Infrastructure / Ad
-hoc)
Channel: (1-14)
Network name (SSID / ESSID)
Authentication method (Open
system / Shared key)
Encryption: (None / WEP /
WPA / WPA2
-PSK)
Encryption key:
To Next Page
Loading...
