Wireless configuration for Macintosh
®
using the Brother automatic installer application
82
5
Installing the printer driver 5
Improper Setup
DO NOT try to cancel any of the screens during this installation.
If your wireless settings fail, and error message will appear during the installation of printer driver and the
installation will be terminated. If you encounter this failure, please go to step a and setup the wireless
connection again.
For Mac OS
®
10.3 or greater users: Go to step a.
For Mac OS
®
10.2.4 to 10.2.8 users: Go to step c.
a The Brother software will search for the Brother printer. During this time the following screen will appear.
Note
• If more than one printer is available, the following list appears. Choose the printer you wish to connect,
and then click OK.
• If there is more than one of the same printer model connected on your network, the Ethernet address
(MAC address) will be displayed after the model name.
To Next Page
Loading...
