Network printing from Windows
®
: basic TCP/IP Peer-to-Peer printing
87
6
m Continue through the Wizard clicking Finish when complete.
Printer driver already installed 6
If you have already installed the printer driver and wish to configure it for network printing, follow these steps:
a Select the printer driver you wish to configure.
b Select File and then Properties.
c Click the Ports tab of the driver and click Add Port.
d Select the port that you wish to use. Typically this would be Standard TCP/IP Port. Then click
New Port....
e The Standard TCP/IP Port Wizard will start. Follow f to i of Printer driver not yet
installed on page 86.
Other sources of information 6
See Chapter 2 of this User’s Guide to learn how to configure the IP address of the printer.
To Next Page
Loading...
