91
8
8
Overview 8
Windows
®
2000/XP, Windows Vista™ and Windows Server
®
2003 users can print using TCP/IP using the
standard Network Printing software and IPP protocol software built into any Windows
®
2000/XP,
Windows Vista™ and Windows Server
®
2003 installation.
Note
• You must configure the IP address on your printer before you proceed with this chapter. If you need to
configure the IP address, see Chapter 2 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• The default password for Brother print servers is access.
• This print server also supports the IPPS printing, see Printing the documents securely on page 117.
Windows
®
2000/XP, Windows Vista™ and
Windows Server
®
2003 IPP printing 8
Use the following instructions if you wish to use the IPP printing capabilities of Windows
®
2000/XP,
Windows Vista™ and Windows Server
®
2003.
a For Windows
®
XP, Windows Vista™ and Windows Server
®
2003: Click the Start button and select
Printers and Faxes.
For Windows
®
2000: Click the Start button, select Settings and then Printers.
b For Windows
®
XP, Windows Vista™ and Windows Server
®
2003: Click Add a printer to start the
Add Printer Wizard.
For Windows
®
2000: Double click the Add Printer icon to start the Add Printer Wizard.
c Click Next when you see the Welcome to the Add Printer Wizard screen.
d Select Network printer.
For Windows
®
XP, Windows Vista™ and Windows Server
®
2003: Make sure that you select
A network printer, or a printer attached to another computer.
For Windows
®
2000: Make sure that you select Network Printer.
e Click Next.
Internet printing for Windows
®
8
To Next Page
Loading...
