Brother HL-4050CDN - Page 104

Confidential
2-28
(4) Lift up the Hook and release it in the direction of arrow 4a. Slide the Holder bush MP in the
direction of arrow 4b, and then remove the Holder bush MP from the shaft of the MP roller
holder ASSY.
Fig. 2-50
(5) Slide the MP roller holder ASSY in the direction of arrow 5a and slightly pull it down in the
direction of arrow 5b. Then, remove it.
Fig. 2-51
MP roller holder ASSY
Hook
Holder bush MP
Front door unit ASSY
4b
4a
<Front side>
MP roller holder ASSY
Front door unit ASSY
5a
5b
<Front side>