Confidential
3-5
Location of screw Screw type Q'ty
Tightening torque
N m (kgf • cm)
Toner LED PCB Screw pan (S/P washer)
M3x16
4 0.50 ±0.1 (5 ±1)
Power inlet socket Taptite, flat B M3x10 2 0.60 ±0.1 (6 ±1)
Ground terminal
Screw pan (S/P washer)
M4x8
1 0.80 ±0.1 (8 ±1)
PS PCB unit Taptite, bind B M4x12 3 0.90 ±0.1 (9 ±1)
Taptite, cup B M4x12 3 1.20 ±0.1 (12 ±1) Belt gear plate ASSY
Screw, cup M3x6 1 0.70 ±0.1 (7 ±1)
LV fan duct Taptite, bind B M3x10 1 0.80 ±0.1 (8 ±1)
Belt unit drive motor ASSY Taptite, cup B M4x12 3 1.20 ±0.1 (12 ±1)
Belt unit drive motor Screw, bind M3x5 2 0.70 ±0.1 (7 ±1)
LT tray guide left rear ASSY Taptite, cup S M3x6 3 0.80 ±0.1 (8 ±1)
LT Solenoid ASSY Screw flanged M3x3.5 1 0.50 ±0.1 (5 ±1)
Solenoid holder ASSY Taptite, cup S M3x6 1 0.80 ±0.1 (8 ±1)
Pinch roller holder cover LT Taptite, bind B M4x10 2 0.70 ±0.1 (7 ±1)
LT relay PCB ASSY Taptite, cup S M3x6 1 0.80 ±0.1 (8 ±1)
LT cover right Shoulder screw 3 0.80 ±0.1 (8 ±1)
LT cover left Shoulder screw 3 0.80 ±0.1 (8 ±1)
LT cover rear Shoulder screw 4 0.80 ±0.1 (8 ±1)
LT front cover, LT beam F Taptite, cup S M3x6 4 0.80 ±0.1 (8 ±1)
Taptite, cup S M3x6 7 0.80 ±0.1 (8 ±1) LT frame unit
Taptite, bind B M4x10 1 0.80 ±0.1 (8 ±1)
LT beam R Taptite, cup S M3x6 2 0.80 ±0.1 (8 ±1)
To Next Page
Loading...
