Brother HL-4050CDN - Page 205

Confidential
3-97
Assembling Note:
- When assembling the Develop gear pate ASSY, make sure to keep the Harness out of the
Frame unit to prevent it from catching and going into the Develop gear plate ASSY.
Fig. 3-139
- If the Joint release lever is protruding from the Develop gear plate ASSY, push the Joint
release lever back into the inside of the Develop gear plate ASSY.
Fig. 3-140
Develop gear plate ASSY
Harness
Flat cable
Develop gear plate ASSY
Joint release lever
<Left side>
Frame unit