Brother HL-4050CDN - Page 214

Confidential
3-106
(2) Remove the three bind B M3x12 Taptite screws and cup B M3x12 Taptite screw, and then
remove the Develop press drive L ASSY.
Fig. 3-155
(3) Remove the bind S M3x6 Taptite screw, and then remove the Develop release motor
ASSY from the Develop press drive L ASSY.
Fig. 3-156
Develop press drive L ASSY
Taptite, bind S M3x6
Develop release motor ASSY
Frame unit
Taptite, bind B M3X12
Develop press
drive L ASSY
Taptite, bind B M3X12
Taptite, bind B M3X12
Taptite, cup B M3x12
<Left side>