Brother HL-4050CDN - Page 236

Confidential
3-128
(3) Remove the bind B M3x10 Taptite screw, and then remove the LV fan duct from the Frame
unit.
Fig. 3-192
(4) Remove the three cup B M4x12 Taptite screws, and then remove the Belt unit drive motor
ASSY from the Frame unit.
(5) Disconnect the Connector from the Belt unit drive motor ASSY.
Fig. 3-193
Frame unit
Taptite, cup B M4x12
Connector
Belt unit drive motor ASSY
LV fan duct
Frame unit
Taptite, bind B M3X10
<Right side>
<Right side>