Brother HL-4050CDN - Page 86

Confidential
2-10
(9) Remove the two cup B M4x14 Taptite screws from the back side of the Top cover ASSY.
Fig. 2-14
(10) Remove the three cup S M3x8 Taptite screws from the front side of the Top cover ASSY.
Fig. 2-15
Taptite, cup B M4x14
Taptite, cup B M4x14
Top cover ASSY
<Back side>
Taptite, cup S M3x8
Taptite, cup S M3x8
Taptite, cup S M3x8
Top cover ASSY
<Front side>