Brother HL-4050CDN - Page 88

Confidential
2-12
(13) Disconnect the Connector from the Wireless LAN PCB ASSY. (HL-4070CDW only)
Fig. 2-18
(14) Remove the four cup S M3x8 Taptite screws, and then remove the two Hook slopes.
Fig. 2-19
Wireless LAN PCB ASSY
Connector
<Front side>
Hook slope
Hook slope
Taptite, cup S M3x8
Frame unit
Taptite, cup S M3x8
<Front side>
Frame unit