Brother HL-4050CDN - Page 91

Confidential
2-15
(2) Connect the two flat cables (CN1, CN4) and one connector (CN8) into the Laser unit.
Fig. 2-24
(3) Assemble the Scanner cover with the ten cup S M3x6 Taptite screws (9 pieces on the top
and 1 piece on the front side).
Note:
When assembling the Scanner cover, secure the Screws in the order of the numbers
which are indicated on the Scanner cover.
Fig. 2-25
Laser unit
<Front side>
Scanner cover
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Taptite, cup S M3x6
Frame unit
<Front side>