Brother HL-4050CDN - Page 121

Control panel setup
114
10
WLAN Status 10
 Status
This field displays the current wireless network status; Active (11b), Active (11g),
Wired LAN Active, WLAN OFF or Connection NG.
a Press the + or - button to select LAN. Press OK.
b Press the + or - button to select WLAN. Press OK.
c Press the + or - button to select WLAN Status. Press OK.
d Press the + or - button to select Status. Press OK.
e The current wireless network status will be displayed; Active (11b), Active (11g),
Wired LAN Active, WLAN OFF or Connection NG
f Press back.
 Signal
This field displays the current wireless network signal strength; Strong, Medium, Weak or None.
a Press the + or - button to select LAN. Press OK.
b Press the + or - button to select WLAN. Press OK.
c Press the + or - button to select WLAN Status. Press OK.
d Press the + or - button to select Signal. Press OK.
e The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
f Press back.
Note
This menu only appears when Status is Active (11b)or Active (11g) for the wireless network.