Troubleshooting
152
13
f If the installation completed successfully, the Firewall on your computer was rejecting the necessary
network connection. In this case, you will need to disable the Firewall on your computer whenever
you install the network drivers.
Note
After the Brother software package is installed, enable again your Firewall. For instructions on how to re-
enable your Firewall software, refer to your User’s Guide or contact the Firewall software manufacturer.
For Macintosh
®
Re-select your printer in the DeviceSelector application located in the Macintosh
HD/Library/Printers/Brother/Utilities.
To Next Page
Loading...
