Wireless configuration for Macintosh
®
using the Brother automatic installer application
69
5
i Choose I’d like to use the SecureEasySetup™ function of my access point to configure my
wireless device. and click Next.
j Confirm the on-screen message and click Next.
k Refer to the instruction manual that came with your access point to use the SecureEasySetup™ mode
of your access point.
l Put the printer in SecureEasySetup™ mode using the control panel.
1 Press any of the Menu buttons (+, -, OK or Back) to take the printer off-line.
Ready
h
Select ab or OK
Machine Info.
2 Press the + or - button to select LAN.
Select ab or OK
LAN
3 Press OK to move to the next menu level.
LAN
Wired
To Next Page
Loading...
