Wireless configuration for Macintosh
®
using the Brother automatic installer application
81
5
s Follow the on-screen instructions.
For the users connected with a network cable for configuration:
Disconnect the network cable between your access point (hub or router) and the printer, and click
Next.
For the users connected without a network cable for configuration:
Using the information you recorded in l, return the wireless settings of your computer back to their
original settings. Check the box if you confirm this step, and then click Next or Finish.
You have completed the wireless setup. If you chose to install the printer driver in step e, Go
to Installing the printer driver on page 91.
To Next Page
Loading...
