Brother HL-4050CDN - Page 86

Control Panel
78
4
Parts Life Drum Life Shows the remaining life for the drum unit.
Belt Life Shows the remaining life for the belt unit.
PF KitMP Life Shows the pages left to print with the PF kit MP.
PF Kit1 Life Shows the pages left to print with the PF kit 1.
PF Kit2 Life
(HL-4050CDN only)
Shows the pages left to print with the PF kit 2.
Fuser Life Shows the pages left to print with the fuser unit.
Laser Life Shows the pages left to print with the laser unit.
Reset Parts Life
(Appears only when
replacement parts have been
changed)
Drum Unit Resets the drum unit life. Appears when you
replace the drum unit.
Belt Unit Resets the belt unit life. Appears when you replace
the belt unit.
PF KitMP Resets the PF kitMP parts life. Appears when you
replace the PF KitMP.
PF Kit1 Resets the PF kit1 parts life. Appears when you
replace the PF Kit1.
PF Kit2 (HL-4050CDN only) Resets the PF kit2 parts life. Appears when you
replace the PF Kit2.
Paper Tray
Submenu Options Descriptions
Tray Use <HL-4040CN only>
Auto*/MP Only/Tray1 Only
Chooses the tray that will be used.
<HL-4050CDN only>
(For no Tray2 installed)
Auto*/MP Only/Tray1 Only
(For Tray2 installed)
Auto*/MP Only/Tray1 Only/
Tray2 Only
Manual Feed Off*/On Chooses whether to feed paper manually.
Priority <HL-4040CN only>
MP>T1*/T1>MP
When Tray Use is chosen as Auto: Chooses the
order in which the printer uses the paper trays that
contain paper of the same size.
<HL-4050CDN only>
(For no Tray2 installed)
MP>T1*/T1>MP
(For Tray2 installed)
MP>T1>T2*/MP>T2>T1>/T1>T2
>MP/T2>T1>MP/T1>T2/T2>T1
/T1>MP>T2/T2>MP>T1
The default settings are shown in Bold with an asterisk.
Machine Info. (continued)
Submenu Menu Selections Descriptions