Brother HL-4050CDN - So-DIMM; SO-DIMM Types

Options
91
5
SO-DIMM 5
The printer has 64 MB of standard memory and one slot for optional memory expansion. You can expand the
memory up to 576 MB by installing a Dual In-line Memory Module (SO-DIMM).
SO-DIMM types 5
You can install the following SO-DIMMs:
 128 MB TechWorks PM133-128
 256 MB TechWorks PM133-256
 512 MB TechWorks PM133-512
 128 MB Buffalo Technology 12462-0001
 256 MB Buffalo Technology 12485-0001
 512 MB Buffalo Technology 12475-0001
Note
• For more information, visit the Buffalo Techonology site at http://www.buffalotech.com
.
• For more information, visit the Techworks web site at http://www.techworks.com
.
In general, the SO-DIMM must have the following specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm (1.25 in.)
SDRAM can be used.
Note
• There might be some SO-DIMMs that will not work with the printer.
• For more information, call the dealer you bought the printer from or Brother Customer Service.