Installing the Printer Driver
45
Macintosh
®
Macintosh
®
Wireless
Network
Using the SecureEasySetup™ software to configure your printer for a
wireless network
The SecureEasySetup™ software of Broadcom
Corporation is an easy way to configure your Brother
device to your wireless network settings. By pushing
a button on the wireless router or access point, you
can complete setup and secure the wireless network.
Your router or access point must also support
SecureEasySetup™. See the user’s guide for your
wireless LAN router or access point for instructions to
configure your printer for a wireless network.
Note
Routers or access points that support
SecureEasySetup™ have the
SecureEasySetup™ symbol as shown below.
1 Make sure that the printer power switch is on.
2 Click Install Printer Driver.
3 Click Wireless Network users.
Note
Please see the Network User’s Guide on the
CD-ROM to install the PS driver (Brother’s
BR-Script Driver).
4 Choose Wireless Setup and Driver Install,
and then click Next.
5 Read the Important Notice and check the box
after you confirm this setting, and then click
Next.
6 Choose I’d like to use the
SecureEasySetup™ function of my access
point to configure my wireless device. and
click Next.
7 Confirm the on-screen message and click
Next.
To Next Page
Loading...
