Installing the Printer Driver
52
STEP 2
Macintosh
®
Macintosh
®
Wireless
Network
15 The Brother software will search for the Brother
printer. During this time the following screen
will appear.
Note
If more than one printer is available, the following
list appears. Choose the printer you wish to
connect, and then click OK.
• If there is more than one of the same printer
model connected on your network, the
Ethernet address (MAC address) will be
displayed after the model name.
16 When this screen appears, click OK.
For Mac OS
®
X 10.3 or greater users:
Setup is now complete.
17 When this screen appears, click Add.
18 Make the following selection.
19 Choose your printer, and then click Add.
Note
If there is more than one of the same printer model
connected on your network, the Ethernet address
(MAC address) will be displayed after the model
name.
20 Click Print Center, then Quit Print Center.
For Mac OS
®
X 10.2.4 to 10.2.8 users:
Setup is now complete.
To Next Page
Loading...
