Brother HL-4140CN - Page 289

3-141
Confidential
(5) Remove the five Taptite cup S M3x6 SR screws to remove the T2 beam F ASSY from the
T2 frame L unit.
Fig. 3-199
(6) Remove the Retaining ring E4 from the F roller, and then remove the Gear 24 and FR
bush.
Fig. 3-200
Taptite cup S M3x6 SR
T2 beam F ASSY
T2 frame L unit
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
F roller
Retaining ring E4
Gear 24
FR bush