Brother HL-4140CN - Real Time Transmission

Sending a fax
19
3
Cancelling a Broadcast in progress 3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a PressStop/Exit.
b Do one of the following:
 To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
 To cancel the current job, press the
button that displays the number
being dialled. Go to step d.
 To exit without cancelling, press
Stop/Exit.
c When the LCD asks if you want to
cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without cancelling, press No
or Stop/Exit.
d Do one of the following:
 To cancel the current job, press Yes.
 To exit without cancelling, press No
or Stop/Exit.
Real Time Transmission 3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can
turn on Real Time TX.
Note
• If the memory is full and you are sending a
black and white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to Off). If
the memory is full, faxes from the scanner
glass cannot be sent until you clear some
of the memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
a Press (FAX).
b Load your document.
c Press d or c to display Real Time TX.
Press Real Time TX.
d Press On.