Brother HL-4140CN - Page 278

Dialling and storing numbers
39
5
i To choose the fax/scan resolution for
the Group number, go to the appropriate
next step as shown in the following
table.
j Select the resolution from Standard,
Fine, S.Fine
1
or Photo and go to
step o.
1
S.Fine is available if the Group is constituted
by only fax numbers.
k Select the resolution from 100 dpi,
200 dpi, 300 dpi or 600 dpi.
 If you chose E-Mail Color PDF,
go to step n.
 If you chose E-Mail Color JPEG
or E-Mail Color XPS, go to
step o.
l Select the resolution from 100 dpi,
200 dpi or 300 dpi.
 If you chose E-Mail Gray PDF, go
to step n.
 If you chose E-Mail Gray JPEG or
E-Mail Gray XPS, go to step o.
m Select the resolution from 200 dpi or
200 x 100 dpi.
 If you chose E-Mail B&W PDF, go
to step n.
 If you chose E-Mail B&W TIFF, go
to step o.
n Select the PDF type from PDF, PDF/A,
Secure PDF or Signed PDF that will
be used to send E-mail.
Note
If you choose Secure PDF, the machine
will ask you to enter a four-digit password
using the numbers 0-9 before it starts
scanning.
o Press OK to confirm.
p Press Stop/Exit.
Option selected in step g Go to step
Fax/IFAX j
E-Mail Color PDF
kE-Mail Color JPEG
E-Mail Color XPS
E-Mail Gray PDF
lE-Mail Gray JPEG
E-Mail Gray XPS
E-Mail B&W PDF
m
E-Mail B&W TIFF