Brother HL-4150CDN - Page 397

7-7
Confidential
(10) Remove the Taptite bind S M3x8 screw from the Fuser cover R.
(11) Release the Hook to remove the Fuser cover R from the Main body.
Fig. 7-9
(12) Disconnect the two Connectors (CN1, CN2) from the Paper eject sensor PCB ASSY.
Fig. 7-10
Main body
Taptite bind S
Fuser cover R
Hook
M3x8
<Back side>
CN1
CN2
Paper eject sensor PCB ASSY
Connector
Connector