Brother HL-4200CN - Actuator DUP

- IV-22 -
2.3.4 Actuator DUP
1) Release the 2 hooks securing the cover actuator to the chute ASSY out.
2) Remove the cover actuator from the chute ASSY out.
3) Pushing the front arm of the actuator DUP down, slide the actuator DUP to the right
and extract the left side shaft of the actuator DUP from the left side bush.
4) Extract the actuator DUP from the chute ASSY out together with the spring SNR
DUP.
5) Remove the spring SNR DUP from the actuator DUP.
Fig.4-41
Fig.4-42
Cover actuator
Spring SNR DUP
A
ctuato
r
DUP
3
1
2