- IV-75 -
2.6.12 Roll ASSY turn
1) Release the hook securing the gear feed 2 to the shaft of the pickup ASSY and pull
out gear feed 2.
2) Pull out the gear idler from the shaft of pickup ASSY.
3) Pull out the gear idler in from the shaft of the pickup ASSY.
4) Remove the right and left E rings securing the shaft of the roll ASSY turn to the
pickup ASSY.
5) Remove the bush/metal securing the right shaft of the roll ASSY turn from the
pickup ASSY.
6) Remove the bush/black securing the left shaft of the roll ASSY turn from the pickup
ASSY.
7) Slide the roll ASSY turn from the pickup ASSY.
Fig.4-131
2.6.13 Roll ASSY
1) Release the hook securing the roll ASSY to the shaft feed 2.
2) Pull out the roll ASSY leftwards from shaft feed 2.
Fig.4-132
Gear idler
Gear idler in
Bush/black
Roll ASSY turn
Bush/metal
Gear feed 2
Shaft feed 2
Roll ASSY
To Next Page
Loading...
