Brother HL-4200CN - Guide Indicator

- IV-81 -
2.6.20 Guide indicator
1) Release the 2 hooks securing the holder shaft to the housing ASSY feeder R.
Fig.4-141
2) Pull out the guide indicator from the housing ASSY feeder R together with the
spring indicator and shaft indicator.
3) Pull out the guide indicator from the shaft indicator.
Note:
Put the leading end of lever low paper on a left convex portion of the guide indicator,
when replacing the guide indicator.
Fig.4-142
Holder shaft indicator
Lever low paper
Guide indicator
Shaft indicator
Spring indicator