Brother HL-4570CDW - Page 81

Control Panel
75
3
WLAN TCP/IP Boot Method Auto*/Static/RARP/
BOOTP/DHCP
Chooses the IP method that
best suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*
1
Enter the Gateway address.
IP Boot Tries 0/1/2/3*.../32767 Specifies the number of setting
trials when the Boot Method
allows automatic IP setting.
APIPA On*/Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 Off*/On Enables or Disables the IPv6
protocol.
Setup Wizard Configures the wireless
network settings using the
setup wizard.
WPS/AOSS Configures the wireless
network settings using WPS or
AOSS™ method.
WPS w/PIN Code Configures the wireless
network settings using WPS
with a PIN code.
Network for HL-4570CDW users (continued)
Submenu 1 Submenu 2 Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.