Installing the Printer Driver
12
STEP 2
Windows
®
USB
Windows
®
1
1
For USB interface cable users (Windows
®
98/Me/2000/XP only)
Note
If the Found New Hardware Wizard appears on
your PC, click Cancel.
Installing the driver and connecting the printer to
your PC
1 Make sure the USB interface cable is NOT
connected to the printer, and then begin
installing the driver. If you have already
connected the cable, remove it.
2 Click Install Printer Driver on the menu
screen.
3 Click USB cable users.
4 When the License Agreement window
appears, click Yes if you agree to the License
Agreement.
5 When this screen appears, make sure the
printer power switch is on.
Connect the USB interface cable to your PC,
and then connect it to the printer. Click Next.
6 Click Finish.
Note
If you want to register your product on-line, check
On-Line Registration.
For Windows
®
98/Me users, the setup is
now complete.
Now go to
For Windows
®
2000/XP users, go to ‘Setting
Your Printer as the Default Printer’.
C
A
N
C
E
L
To Next Page
Loading...
