2-45
Confidential
Size Error 2-
sided
Press Stop[x].
Specify the correct
paper and load the
same size paper as
Printer driver
setting.
For 2-sided printing, paper size
setting of the printer driver that
was not supported by 2-sided
printing was selected.
9701 2-73
Specify the correct
paper and press
[Retry].
The registration rear sensor
detected that the fed paper was
larger or smaller than the
specified size in 2-sided
printing.
8A01 2-71
Size
mismatch
Reload correct
paper in Tray1,
then press [Retry].
The size of paper loaded in the
T1 and the one specified from
the driver are not same when
printing from the T1.
9002 2-72
Small paper Open the Back
Cover and then
press [Retry].
The paper size indicated for
printing data while the back
cover is closed was under the
specified value.
8D02 2-72
Storage Full There is no space
in the Flash
Memory.
Storage memory was full and
data could not be saved.
C900 2-80
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
