2-29
Confidential
Print Unable
2E
Turn the power off
and then back on
again.
Could not communicate with the
cartridge sensor on the machine
side.
2E00 2-56
Cartridge sensor on the
machine side does not work.
2E02 2-56
Cartridge sensor version on the
machine side is not available.
2E04 2-56
Print Unable
38
Turn the power off
and then back on
again.
A temperature error occurred in
the external temperature/
humidity sensor.
3801 2-56
Print Unable
3A
Turn the power off
and then back on
again.
A communication error occurred
between the controller and
engine in main PCB.
3A00 2-57
Print Unable
E0
Turn the power off
and then back on
again.
An error occurred at the ROM
check sum in the firmware.
E000 2-81
Print Unable
E1
Turn the power off
and then back on
again.
Program error
E100 2-81
Print Unable
E5
Turn the power off
and then back on
again.
An error occurred during access
to the DRAM in the main PCB.
E500 2-81
Print Unable
E6
Turn the power off
and then back on
again.
Write error in the EEPROM of
the main PCB
E600 2-81
Print Unable
E7
Turn the power off
and then back on
again.
Detected an error in main PCB. E701 2-81
E702 2-81
Print Unable
E9
Turn the power off
and then back on
again.
An error occurred while
initializing the NFC.
E900 2-81
Print Unable
ZC
Turn the power off
and then back on
again.
Detected that supply power is
unstable (less than 100 times).
6F00 2-67
Error message
Description
Error
codes
Refer
to:
First line Second line
To Next Page
Loading...
