Home > Routine Maintenance > Replace Supplies > Reset the Drum Counter
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following
steps:
IMPORTANT
DO NOT reset the drum counter unless you are replacing the drum unit.
>> HL-L6250DW
>> HL-L6400DW/HL-L6400DWT
HL-L6250DW
1. Make sure the machine is turned on.
2. Open the front cover.
3. Press and hold OK for about two seconds to display the [Drum Unit] option, and then press OK.
4. Press a for [Reset] to reset the drum counter.
5. Close the front cover of the machine.
HL-L6400DW/HL-L6400DWT
1. Make sure the machine is turned on.
2. Press
[Settings] > [Machine Information] > [Parts Life].
3. Press and hold [Drum Life].
4. Press [Yes].
5. Press .
Related Information
• Replace Supplies
• Replace the Drum Unit
291
To Next Page
Loading...
