Brother HL-L6400DW - Page 334

Level 1 Level 2 Level 3 Description
WLAN WLAN Status SSID
Display SSID.
Comm. Mode
Display the current Communication Mode.
MAC Address
- Display the MAC address of the machine.
Set to Default
- Restore wireless network settings of your machine to the
factory settings.
WLAN Enable
- Turn the wireless interface on or off.
Wi-Fi Direct Push Button
- Configure your Wi-Fi Direct network settings using the one-
button push method quickly.
PIN Code
- Configure your Wi-Fi Direct network settings using WPS with
a PIN code quickly.
Manual
- Configure your Wi-Fi Direct network settings manually.
Group Owner
- Set your machine as the Group Owner.
Device Info. Device Name
View your machine's device name.
SSID
Display the Group Owner's SSID.
IP Address
Display your machine's IP Address.
Status Info. Status
Display the Wi-Fi Direct network status.
Signal
Display the current Wi-Fi Direct network signal strength.
When your machine acts as Group Owner, the LCD always
displays Strong.
Channel
Display the channel in use when the Status is G/O
Active or Client Active.
Speed
Display the connection speed when the Status is G/O
Active or Client Active.
I/F Enable
- Enable or disable the Wi-Fi Direct connection.
IPsec
- - IPsec is an optional security feature of the IP protocol that
provides authentication and encryption services. We
recommend contacting your network administrator before
changing this setting.
Network Reset
- - Restore all network settings of your machine to the factory
settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’ you must manually enter an IP address from the machine's control panel.
[Factory Reset] (Available only for certain models)
Description
Reset the machine and restore the printer settings (including command settings) to the factory settings.
[Reset Menu] (Available only for certain models)
Level 1
Description
Network
Restore all network settings of your machine to the factory settings.
Factory Reset
Reset the machine and restore the printer settings (including command settings) to the factory
settings.
Related Information
• Settings and Features Tables
329