General Information
106
3
Auto Power Off 3
If the machine is in Deep Sleep mode for a certain length of time, it will go into Power Off mode. To start
printing, press on the control panel, and then send the print job.
You can choose how long the machine must be in Deep Sleep mode before it goes into Auto Power Off mode,
by following these steps:
a Press a or b ( + or -) to choose General Setup. Press OK.
b Press a or b ( + or -) to choose Ecology. Press OK.
c Press a or b ( + or -) to choose Auto Power Off. Press OK.
d Press a or b ( + or -) to choose Off, 1 hour, 2 hours, 4 hours or 8 hours. Press OK or Go.
The machine does not go into Power Off mode when the machine is connected to a wired network or has
secure documents in the memory.
To Next Page
Loading...
