EasyManua.ls Logo

Brother HL-L8250CDN - Replacing the Belt Unit

Brother HL-L8250CDN
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Routine Maintenance
132
5
Replacing the belt unit 5
Model Name: BU-320CL
A new belt unit can print approximately 50,000 pages (5 pages per job)
12
or 20,000 pages
(1 page per job)
12
1
A4 or Letter size single-sided pages.
2
Belt unit life is approximate and may vary by type of use.
Belt End Soon 5
Belt End Soon
If the LCD displays Belt End Soon, it means the belt unit is near the end of its life. Buy a new belt unit and
have it ready before you get a Replace Belt message. To replace the belt unit, see Replacing the belt unit
on page 132.
Replace Belt 5
When the following message appears on the LCD, you must replace the belt unit:
Replace Belt
IMPORTANT
DO NOT touch the surface of the belt unit. If you touch it, it could degrade print quality.
Damage caused by incorrect handling of the belt unit may void your warranty.
Replacing the belt unit 5
a Make sure that the machine is turned on.
b Press the front cover release button and pull open the front cover.

Table of Contents

Other manuals for Brother HL-L8250CDN

Related product manuals