Brother HL-L9300CDW - Page 188

3-47
Confidential
(3) Remove the Taptite cup S M3x8 SR screw from the front of the Top cover ASSY.
Fig. 3-47
(4) Remove the two Taptite bind B M4x12 screws from the back of the Top cover ASSY.
Fig. 3-48
Assembling Note:
Never fail to tighten the screw if the machine to be repaired is a model with a screw.
Taptite cup S M3x8 SR
Top cover ASSY
<Front side>
Taptite bind B
Top cover ASSY
M4x12
<Back side>