Brother HL-L9300CDW - Page 214

3-73
Confidential
(9) Release all the wiring from the Cable rack.
(10) Release the six Hooks and slide the Cable rack in the direction of the arrow and remove it
from the Main body.
Fig. 3-87
(11) Remove the Taptite cup S M3x8 SR screw and fasten the Under bar ground spring to the
Rib of the Main body.
Fig. 3-88
Hook
Cable rack
Hook
Hook
Hook
Process drive unit
Hook
<Left side>
Taptite cup S M3x8 SR
Under bar ground spring
Main body
Rib
<Back side>