Brother HL-L9300CDW - Page 215

3-74
Confidential
(12) Remove the five Taptite bind B M4x12 screws, one Taptite pan (washer) B M4x12 DA
screw, and the one Screw pan (S/P washer) M3.5x6 screw from the Process drive unit.
Release the two Hooks and remove the Process drive unit from the Main body.
Fig. 3-89
Taptite bind
Hook
Main body
B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
Process drive unit
Taptite bind B M4x12
Taptite bind B M4x12
Taptite bind B M4x12
Process drive unit
Hook
Hook
Taptite pan (washer)
Screw pan (S/P washer) M3.5x6
Hook
B M4x12 DA
A view
<A view>
Taptite pan (washer)
B M4x12 DA
Screw pan (S/P washer)
M3.5x6
<Left side>