Brother HL-L9300CDW - Page 248

3-107
Confidential
(5) Pull out the T1 drive shaft gear Z17M07 from the Paper feed unit and remove the Edge
actuator.
Fig. 3-146
(6) Release the wiring of the T1 paper feed sensor PCB ASSY.
(7) Release the three Hooks and remove the T1 paper feed sensor PCB ASSY from the
Paper feed unit.
Fig. 3-147
Harness routing: Refer to “ Paper Feed Unit”
Paper feed unit
5a
5b
Edge actuator
T1 drive shaft gear Z17M07
T1 paper feed sensor PCB ASSY
Hook
Paper feed unit