Brother HL-L9300CDW - Page 263

3-122
Confidential
Fig. 3-172
(10) Release the Hook and remove the Gear 20A from the LT frame L unit.
Fig. 3-173
Assembling Note:
When assembling the Feed roller, be sure to assemble it in a way that the Rib of the LT
paper feed frame unit comes between “A” and “B” of the Lift lever B, and the lever of
the LT paper feed holder comes in front of “B”.
Feed roller
LT paper feed frame unit
Lift lever B
“A”
Lever
Rib
LT paper feed holder
“B”
Hook
LT frame L unit
Gear 20A
<Left side>