Brother HL-L9300CDW - Page 359

7-10
Confidential
(18) Remove the two Taptite pan B M4x14 screws to remove the Fuser unit from the Main body.
Fig. 7-15
Fig. 7-16
Note:
- Do not apply a physical impact or vibration to the Fuser unit.
- Do not touch the roller and electrodes as shown in the figure below to prevent breakage
of the Fuser unit.
Taptite pan B M4x14
Fuser unit
Main body
Taptite pan B M4x14
<Back side>
Fuser unit