Brother HL-L9300CDW - Page 36

2-16
Confidential
7200 When the paper is fed from the
MP tray, after the MP
registration front sensor detects
paper pass, the registration rear
sensor does not detect paper
pass after a set period of time.
2-64
7300 In the case of printing by feeding
paper from the paper tray 1,
after the T1 paper feed sensor
detects paper pass, the
registration front sensor does
not detect paper pass after a set
period of time.
2-65
7301 ---
7400 In the case of printing by feeding
paper from the T2 paper tray
unit, after the T2 paper feed
sensor detects paper pass, the
registration front sensor does
not detect paper pass after a set
period of time.
2-65
7401 ---
7500 In the case of printing by feeding
paper from the T3 paper tray
unit, after the T3 paper feed
sensor detects paper pass, the
registration front sensor does
not detect paper pass after a set
period of time.
2-66
7501 ---
7502 ---
7601 ---
7602 ---
7700 After the first side is printed in
2-sided printing mode, the
registration front sensor does
not detect paper pass after a set
period of time.
2-66
7701 ---
7702 ---
7703 ---
7704 ---
7705 ---
7801 ---
7802 ---
Error
Codes
Description
Refer
to:
7900 ---
7C00 ---
7D00 ---
7E00 ---
8000 ---
8401 ---
8402 While the T2 paper tray unit is
open state, print or adjustment
operation was attempted.
2-67
8403 While the T3 paper tray unit is
open state, print or adjustment
operation was attempted.
2-67
8501 The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(before the registration of
printing in the engine)
2-68
8502 The T2 paper feed sensor
detected that the T2 paper tray
unit is open in printing by
feeding paper from the T3 paper
tray unit. (before the registration
of printing in the engine)
2-68
8503 ---
8504 ---
8505 The T1 paper feed sensor
detected that the paper tray 1 is
open in 2-sided printing or
printing by feeding paper from
the T2 paper tray unit.
(after the registration of printing
in the engine)
2-68
8506 The T2 paper feed sensor
detected that the T2 paper tray
unit is open in printing by
feeding paper from the T3 paper
tray unit. (after the registration of
printing in the engine)
2-68
8507 ---
8508 ---
8601 ---
Error
Codes
Description
Refer
to: