2-18
Confidential
9306 For printing specifying Auto, it
was detected that no paper was
loaded in any of the paper trays.
2-74
9307 ---
9401 ---
9402 ---
9403 ---
9404 ---
9501 ---
9502 ---
9503 ---
9504 ---
9505 ---
9601 ---
9608 ---
9701 For 2-sided printing, the tray
whose paper size was not
supported by 2-sided printing
was selected.
2-75
9702 For printing by feeding paper
from the paper tray 1, the size of
paper specified from the driver
set the size which was not
supported by the paper tray 1.
2-75
9703 For printing by feeding paper
from the T2 paper tray unit, the
size of paper specified from the
driver set the size which was not
supported by the T2 paper tray
unit.
2-75
9704 For printing by feeding paper
from the T3 paper tray unit, the
size of paper specified from the
driver set the size which was not
supported by the T3 paper tray
unit.
2-75
9705 ---
9801 Error occurred with the value
measured during color density
adjustment performed from the
control panel.
2-76
Error
Codes
Description
Refer
to:
9802 Dot counter or develop roller
counter of color toner has
reached the upper limit during
color density adjustment
performed from the control
panel.
2-76
9803 Density patch measurement
ended unsuccessfully during
color density adjustment
performed from the control
panel.
2-77
9804 Error occurred with the value
measured during density sensor
sensitivity calibration.
2-77
9901 ---
9902 ---
9903 ---
9A01 Error occurred with the value
measured during auto color
registration performed from the
control panel.
2-78
9A02 Dot counter or develop roller
counter of color toner has
reached the upper limit during
auto color registration performed
from the control panel.
2-78
9A03 Error occurred during patch data
printing in auto color registration
performed from the control
panel.
2-79
9C01 ---
9C02 ---
9C03 ---
9C06 ---
9C07 ---
A000 ---
A200 ---
A300 ---
A400 ---
A500 ---
A600 ---
A700 ---
Error
Codes
Description
Refer
to:
To Next Page
Loading...
