Brother HL-L9300CDW - Page 44

2-24
Confidential
Limit
Exceeded
Function Locked
In the case of PC-print, the
maximum number of pages that
can be printed is exceeded.
--- 4.11.1
Function Locked.
Job Deleted. Press
Go.
In the case of Secure print, the
maximum number of pages that
can be printed is exceeded.
--- 4.11.1
Function Locked.
Press Go.
In the case of USB Direct print,
the maximum number of pages
that can be printed is exceeded.
--- 4.11.1
Log Access
Error
Authentication
Error, contact your
administrator.
User authentication is
unavailable due to incorrect user
name, incorrect password, or
asynchronous date and time
between the machine and server.
C002 2-80
File Access Error,
contact your
administrator.
Access to a file is unavailable
due to incorrect directory name,
no write permission on directory,
file write lock, or no write
permission on file.
C003 2-80
Server Timeout,
contact your
administrator.
Timeout occurred with access
request sent to server due to
incorrect server address, network
disconnection, or inactive server.
C001 2-80
Wrong Date &Time,
contact your
administrator.
The current time necessary for
user authentication is unavailable
due to time not being obtained.
C004 2-80
Machine
Error **
Some kind of machine error
occurred. Refer to the error code
of “**”.
**
No Belt Unit Open the Front
Cover, pull out the
Drum Unit
completely and
install the Belt Unit.
The registration mark sensor
detected that no belt unit was set.
6400 2-58
No Drum
Unit
Install the Drum
Unit.
The current value between the
CHG and GRID terminals and the
toner sensor detected that there
were no toner cartridges of any
colors and detected that the drum
unit was not set.
6200 2-56
No HUB
Support
-
USB HOST HUB connection
error
--- 4.11.2
Error Message
State
Error
Codes
Refer
to:
1st line 2nd line