2-75
Confidential
■ Error code 9701
For 2-sided printing, the tray whose paper size was not supported by 2-sided printing was
selected.
Error code 9702
For printing by feeding paper from the paper tray 1, the size of paper specified from the driver
set the size which was not supported by the paper tray 1.
Error code 9703
For printing by feeding paper from the T2 paper tray unit, the size of paper specified from the
driver set the size which was not supported by the T2 paper tray unit.
Error code 9704
For printing by feeding paper from the T3 paper tray unit, the size of paper specified from the
driver set the size which was not supported by the T3 paper tray unit.
< User Check >
- The size of the paper specified from the driver shall be A4 or Letter size and load the same
size of paper to the specified paper tray.
Size Error DX
Press Cancel. Specify the correct paper and load the same size paper as the
Printer driver setting.
Size Error
Specify the correct paper size for Tray 1.
Size Error
Specify the correct paper size for Tray 2.
Size Error
Specify the correct paper size for Tray 3.
Step Cause Remedy
1 Main PCB failure Replace the main PCB ASSY.
To Next Page
Loading...
