Brother HL-S7000DN - 4.2.8 Paper jam

2-112
Confidential
4.2.8 Paper jam
■ Paper jam at the paper tray 1
<User Check>
- Check if the paper is loaded into the paper tray 1 correctly.
- Turn back the paper loaded in the paper tray 1 or change the orientation of the paper by
180
° .
- Adjust the paper guide corresponding to the paper size.
- Check if too much paper is loaded in the tray.
- Check if the thickness of the paper is 60 to 105 g/m
2
.
- Fan the stack of paper well and reinsert the papers into the paper tray.
Step Cause Remedy
1 Foreign object around paper tray
1
Remove the foreign object.
2 Retard roller cover installation
failure
Re-assemble the retard roller cover.
3 Coming off of T1 eject sensor Re-assemble the T1 eject sensor.
4 Paper feed sensor harness
connection failure
Reconnect the paper feed sensor
harness.
5 T1 paper empty sensor failure Replace the paper tray.
6 Paper feed PCB failure Replace the paper feed PCB ASSY.
7 Main PCB failure Replace the main PCB ASSY.