Brother HL-S7000DN - 11.5 LT Side Cover R

3-126
Confidential
11.5 LT Side Cover R
(1) Remove the two Taptite cup S M3x6 SR screws from the LT side cover R.
(2) Release the two Hooks at the upper side and two Hooks at the lower side.
Fig. 3-150
(3) Release the two Hooks and slide the LT side cover R in the direction of the arrow to
remove it from the LT frame unit.
Fig. 3-151
Note:
Be careful when you remove the LT side cover R as its "A" is easily broken.
Taptite cup S
Hook
Hook
LT side cover R
<Front>
M3x6 SR
LT side cover R
Hook
“A”
<Front>