Brother HL-S7000DN - 11.17 Paper Feed Holder ASSY;Paper Feed Actuator;Paper Empty Sensor PCB ASSY

3-145
Confidential
11.17 Paper Feed Holder ASSY/Paper Feed Actuator/
Paper Empty Sensor PCB ASSY
(1) Remove the LT clutch gear and LT clutch shaft from the LT frame L.
(2) Remove the three Taptite cup S M3x6 SR screws to remove the Gear plate from the LT
frame L.
Fig. 3-183
Fig. 3-184
Assembling Note:
When assembling the LT clutch shaft and LT clutch gear, the Pin mounted on the LT clutch
shaft easily comes off. When inserting the LT clutch shaft into the LT clutch gear, be sure to
mount the Pin without fail.
LT clutch shaft
LT clutch gear
Taptite cup S M3x6 SR
Taptite cup S M3x6 SR
LT frame L
<Front>
1
2
Gear plate
LT clutch gear
LT clutch shaft
Pin