Brother HL-S7000DN - Choosing the Right Paper

Troubleshooting
143
6
Machine Information 6
Checking the Serial Number 6
You can see the machine’s Serial Number on the LCD.
a Press Menu.
b Press a or b to choose Machine Info. Press OK.
c Press a or b to choose Serial No. Press OK.
The machine’s Serial Number will be displayed.
d Press Cancel to return to Ready mode.
Default settings 6
The machine has three levels of default settings; the default settings have been set at the factory before
shipment. (See Menu table uu page 77.)
 Network
 Factory Reset
 Settings Reset
Note
• You cannot modify the preset default settings.
• P
age counters can never be changed.
Network default settings 6
If you want to reset only the print server back to its default settings (by resetting all network information such
as the password and IP address), follow these steps:
a Press Menu.
b Press a or b to choose Reset Menu. Press OK.
c Press a or b to choose Network. Press OK.
d Press 1 to choose 1.Reset.
e Press 1 for reboot. The machine will restart automatically.